Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM22
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M30L0T7000T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
ទាញ : u528_spead_trum_sim2
Monday, December 17, 2012
T13_T14 _ T528
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:20,
Signal Pin:21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:22 D-:23
>>> Searching Mstar Driver...
Find Mstar DriverJ:\ --> GCREADER
CPU_ID:0x00508003
CPU Name:MSW8533D
Connecting Mstar CPU of the Mobile....
>>> Downloading First Boot...
>>> Downloading Second Boot...
BOOT version: 0x050618
Mobile RAM: 0x00400000
Flash Name:WINBOND_W25Q128BV7
Flash ID:0x00EF4018
Flash Size:0x01000000 -> 16M
>>> Erasing Flash Now....
Hint: Use Page Erase Mode,Progress bar not standard...
>>> Writing Flash File...
All Done...
ទាញ : T13_T14___T528_CPU
VCC Pin:
GND Pin:20,
Signal Pin:21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:22 D-:23
>>> Searching Mstar Driver...
Find Mstar DriverJ:\ --> GCREADER
CPU_ID:0x00508003
CPU Name:MSW8533D
Connecting Mstar CPU of the Mobile....
>>> Downloading First Boot...
>>> Downloading Second Boot...
BOOT version: 0x050618
Mobile RAM: 0x00400000
Flash Name:WINBOND_W25Q128BV7
Flash ID:0x00EF4018
Flash Size:0x01000000 -> 16M
>>> Erasing Flash Now....
Hint: Use Page Erase Mode,Progress bar not standard...
>>> Writing Flash File...
All Done...
ទាញ : T13_T14___T528_CPU
Friday, December 7, 2012
Thursday, December 6, 2012
IPhcne I5
Initializing...
DA_LIB_VER_3.6.0.0
It is sensing the pinout fast...
RXD=8 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M36LOR7050U3ZS
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Saved file to:
C:\Documents and Settings\KHMER GSM\Desktop\I5
All Done.
Reading Project Version...
Platform Version: SND_F8_128_DXT_RV1.0_Release
Project Version: MT6253_F8_128_DXT_FL_RV1.0
MMI Version: MT6253_GEMINI
BASE Version: BASE_W09.20_P12
HW Version: [HW Version]: F8_V1.5
Project Bulid Time: 4-19-2011 17:58:35
DA_LIB_VER_3.6.0.0
It is sensing the pinout fast...
RXD=8 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M36LOR7050U3ZS
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Saved file to:
C:\Documents and Settings\KHMER GSM\Desktop\I5
All Done.
Reading Project Version...
Platform Version: SND_F8_128_DXT_RV1.0_Release
Project Version: MT6253_F8_128_DXT_FL_RV1.0
MMI Version: MT6253_GEMINI
BASE Version: BASE_W09.20_P12
HW Version: [HW Version]: F8_V1.5
Project Bulid Time: 4-19-2011 17:58:35
ទាញយក : IphcneI5_CPU_SC6600L2
I-mobile 227
Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
Failed to check H/W.
Get Project ID from phone...
Project ID: C1013SA_4.5_0x01216_EU_Samart_MALAY_NUMONYX_P5
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
Failed to check H/W.
Get Project ID from phone...
Project ID: C1013SA_4.5_0x01216_EU_Samart_MALAY_NUMONYX_P5
ទាញយក : I-mobile_227
HTO
Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=10 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM22
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_ST_M36P0R8060N0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=357511026003306
IMEI 2=352751019523267
--------NOR_FLASH_CONFIG--------
Flash Bank count=1025519736
EFS sector count=623917164
File sector count=2013265920
Sector size=0x00000000
Flash start addr=0x00000100
Flash size=0x00000100
Fix NV addr=0x00000000
Product information addr=0x00000100
MMI resource addr=0x00000200
------Auto Format Address-------
Start=0x00000000
Size =0x00000100
Read FS info...done
ទាញយក : HTO
6700s
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM20
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_ST_M30L0T7000T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=356297048658XXX
IMEI 2=356297048658XXX
--------NOR_FLASH_CONFIG--------
Flash Bank count=364602624
EFS sector count=8192
File sector count=8963072
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00000100
Fix NV addr=0x00004008
Product information addr=0x00004100
MMI resource addr=0x00000155
------Auto Format Address-------
Start=0x00000000
Size =0x00004100
Read FS info...done
16 MB FLASH FILE
ទាញយក : 6700scopy
SAMSUNG_TELSDA_T528_Mstar
>>> USB Pinfind No need Hold Mobile Power key...
>>> Searching Mstar Driver...
For Mstar 853XB CPU;You need Hold Down the Power KEY.
Find Mstar DriverG:\ --> GCREADER
CPU_ID:0x00508003
CPU Name:MSW8533D
Connecting Mstar CPU of the Mobile....
>>> Downloading First Boot...
>>> Downloading Second Boot...
BOOT version: 0x050618
Mobile RAM: 0x00400000
Flash Name:WINBOND_W25Q128BV7
Flash ID:0x00EF4018
Flash Size:0x01000000 -> 16M
All Done...
ទាញយក : SAMSUNG_TELSDA_T528_Mstar
Subscribe to:
Posts (Atom)