Pel_RDA_small

please press Power on/off button...
  CPU ID: 8809 4005
  Flash ID : 00C84016
  Flash Type: SF_GD25Q32                
  Flash Len :0x400000(4M)

Download

Sunup ZY950 CPU 6803H

>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:9,
Signal Pin:3, 4, 5, 6, 7, 8, 10, 11, 12,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:5 D-:6
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM52
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
>>> Mobile Info
CPU Name:6803H
Flash ID:000098D1
Flash Size:08000000->128M
Flash Name:NAND_TOSHIBATC58NVG0S3AFT
All Done...

Download 

CPPC Model A606

Side 16MB

Set baudrate to 115200 is ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L7A      Flash: NOR_ST_M36LOR7050U3ZS
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...

Downlaods

n9 cpu namemsw8533d

>>> Getting Mobile Connection Info...
    VCC Pin:
    GND Pin:17,
    Signal Pin:18, 19, 20, 21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
    USB Pin Out: D+:22  D-:21
>>> Searching Mstar Driver...
    Find Mstar DriverJ:\  -->  GCREADER
    CPU_ID:0x00508003
    CPU Name:MSW8533D
    Connecting Mstar CPU of the Mobile....
>>> Downloading First Boot...
>>> Downloading Second Boot...
    BOOT version: 0x050618
    Mobile RAM: 0x00400000
    Flash Name:NUMONYX_M58LR128KCv
    Flash ID:0x0020882E
    Flash Size:0x01000000 -> 16M
>>> Reading Flash...
    Reading Flash Done...

Downlaods

u528 spead trum sim2

Initializing...
 DA_LIB_VER_3.9.0.0
 It is sensing the pinout fast...
 D-=6  D+=5
 Searching commport...please wait...
 Connecting...
 Spd USB-to-Serial=COM22
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700100025A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 is ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L2      Flash: NOR_ST_M30L0T7000T0
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...

ទាញ : u528_spead_trum_sim2

T13_T14 _ T528

>>> Getting Mobile Connection Info...
    VCC Pin:
    GND Pin:20, 
    Signal Pin:21, 22, 23, 24, 
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
    USB Pin Out: D+:22  D-:23
>>> Searching Mstar Driver...
    Find Mstar DriverJ:\  -->  GCREADER
    CPU_ID:0x00508003
    CPU Name:MSW8533D
    Connecting Mstar CPU of the Mobile....
>>> Downloading First Boot...
>>> Downloading Second Boot...
    BOOT version: 0x050618
    Mobile RAM: 0x00400000
    Flash Name:WINBOND_W25Q128BV7
    Flash ID:0x00EF4018
    Flash Size:0x01000000 -> 16M
>>> Erasing Flash Now....
    Hint: Use Page Erase Mode,Progress bar not standard...
>>> Writing Flash File...
    All Done...

ទាញ : T13_T14___T528_CPU

Q9 VIBER (APPLE LOGO)

ទាញយក : Q9_VIBER__APPLE_LOGO

IPhcne I5

 

 Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast...
 RXD=8  TXD=7
 Connecting...
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700100006A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L2      Flash: NOR_ST_M36LOR7050U3ZS
 setting the Flash Parameters...
 Settings have been completed!
 Reading Flash...
 Saved file to:
 C:\Documents and Settings\KHMER GSM\Desktop\I5
 All Done.
 Reading Project Version...
 Platform Version:  SND_F8_128_DXT_RV1.0_Release
 Project Version: MT6253_F8_128_DXT_FL_RV1.0
 MMI Version: MT6253_GEMINI
 BASE  Version:     BASE_W09.20_P12
 HW Version: [HW Version]:  F8_V1.5
 Project Bulid Time: 4-19-2011 17:58:35

ទាញយក : IphcneI5_CPU_SC6600L2

I-mobile 227

 

Initializing...
 DA_LIB_VER_4.0.3.2
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=7  TXD=9
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6223,    HardwareVer:8A05,    SoftwareVer:8A00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 002088C400000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 Failed to check H/W.
 Get Project ID from phone...
 Project ID: C1013SA_4.5_0x01216_EU_Samart_MALAY_NUMONYX_P5

ទាញយក : I-mobile_227

i-mobile 181 V104_6432_20110307_1752

ទាញយក : i-mobile_181_V104

HTO

Initializing...
 DA_LIB_VER_3.9.0.0
 It is sensing the pinout fast...
 D-=10  D+=9
 Searching commport...please wait...
 Connecting...
 Spd USB-to-Serial=COM22
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700900025A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 is ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L7      Flash: NOR_ST_M36P0R8060N0
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 0A
 IMEI 1=357511026003306
 IMEI 2=352751019523267
 --------NOR_FLASH_CONFIG--------
 Flash Bank count=1025519736
 EFS sector count=623917164
 File sector count=2013265920
 Sector size=0x00000000
 Flash start addr=0x00000100
 Flash size=0x00000100
 Fix NV addr=0x00000000
 Product information addr=0x00000100
 MMI resource addr=0x00000200
 ------Auto Format Address-------
 Start=0x00000000
 Size =0x00000100
 Read FS info...done

ទាញយក : HTO

G715

ទាញយក : G715

6700s

 

 Initializing...
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM20
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_ST_M30L0T7000T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=356297048658XXX
IMEI 2=356297048658XXX
--------NOR_FLASH_CONFIG--------
Flash Bank count=364602624
EFS sector count=8192
File sector count=8963072
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00000100
Fix NV addr=0x00004008
Product information addr=0x00004100
MMI resource addr=0x00000155
------Auto Format Address-------
Start=0x00000000
Size =0x00004100
Read FS info...done
16 MB FLASH FILE

ទាញយក : 6700scopy

SAMSUNG_TELSDA_T528_Mstar

>>> USB Pinfind No need Hold Mobile Power key...
>>> Searching Mstar Driver...
    For Mstar 853XB CPU;You need Hold Down the Power KEY.
    Find Mstar DriverG:\  -->  GCREADER
    CPU_ID:0x00508003
    CPU Name:MSW8533D
    Connecting Mstar CPU of the Mobile....
>>> Downloading First Boot...
>>> Downloading Second Boot...
    BOOT version: 0x050618
    Mobile RAM: 0x00400000
    Flash Name:WINBOND_W25Q128BV7
    Flash ID:0x00EF4018
    Flash Size:0x01000000 -> 16M
    All Done...

ទាញយក​ : SAMSUNG_TELSDA_T528_Mstar